Rotary-Only Rebar Cutters


Rotary-Only Rebar Cutters

At last, the answer to drilling through concrete-embedded rebar! No more broken or shattered hammer bits; now you can drill through the rebar and not have to relocate the hole to avoid the rebar! 

DIA.OVERALL
LENGHT
STRAIGHT-SHANK
SDS+ SHANK
WT.
(LBS)
SUGGESTED
RPM'S
PIECES
PART NO.
LIST PRICE
PART NO.
LIST PRICE
3/8"8"RB-6$ 59.00SRB-6$ 61.000.3850-1200







This is a
one-piece
system

(shanks are
non-removable).
3/8"12"RB-6-1278.00SRB-6-1279.000.3850-1200
3/8"18"RB-6-1890.00SRB-6-1893.000.5850-1200
7/16"12"RB-771.00SRB-773.000.5850-1200
1/2"12"RB-861.00SRB-864.000.6850-1200
1/2"18"RB-8-1892.00SRB-8-1895.001.0850-1200
9/16"12"RB-971.00SRB-973.000.7850-1200
9/16"18"RB-9-1897.00SRB-9-1899.001.1850-1200
5/8"12"RB-1074.00SRB-1076.000.8750-1000
5/8"18"RB-10-1899.00SRB-10-18101.001.3750-1000
11/16"12"RB-1184.00SRB-1186.000.9750-1000
3/4"12"RB-1285.00SRB-1287.001.1600-850
3/4"18"RB-12-18109.00SRB-12-18111.001.6600-850
3/4"24"RB-12-24125.00SRB-12-24127.001.8600-850
13/16"12"RB-1392.00SRB-1395.001.1600-850
7/8"12"RB-14118.00SRB-14121.000.9600-850



This is a
two-piece system,
and comes with a
shank to make an
overall length of
12"; however,
longer or shorter
shanks are avail-
able...see shanks
below
1"12"RB-16123.00SRB-16126.001.1500-750
1 1/8"12"RB-18145.00SRB-18148.001.2500-750
1 1/4"12"RB-20152.00SRB-20155.001.3450-600
1 3/8"12"RB-22154.00SRB-22157.001.4450-600
1 1/2"12"RB-24169.00SRB-24172.001.6350-500
1 5/8"12"RB-26206.00SRB-26209.001.7350-500
1 3/4"12"RB-28213.00SRB-28216.001.8350-500
2"12"RB-32240.00SRB-32244.002.5350-500
2 1/2"12"RB-40260.00SRB-40264.003.1350-500
STRAIGHT
SHANK
SDS+
SHANK
straight-shank
sds+-shank
RB
SRB

REPLACEMENT SHANKS 7/8" & LARGER

REPLACEMENT CUTTER HEAD 7/8" & LARGER

tds

STRAIGHT SHANK

stds

SDS+ SHANK

rb-ho

PART
NO.
LIST
PRICE
SHANKTO MAKE OAL
BIT LENGTH
WT
(lbs)
THREAD
SIZE
 DIA.PART
NO.
LIST
PRICE
WT
(lbs)
SUGGESTED
RPM'S
THREAD
SIZE
 
TDS-2-9$ 18.001/2"9"0.4
bracket
1/2-13
MALE
7/8"RB-14HO$ 98.000.4600-850
bracket
1/2-13
FEMALE
TDS-2-1220.001/2"12"0.51"RB-16HO103.000.6500-750
TDS-2-1828.001/2"18"0.91 1/8"RB-18HO125.000.7500-750
TDS-2-2438.001/2"24"1.21 1/4"RB-20HO132.000.8450-600
STDS-2-921.00SDS+9"0.41 3/8"RB-22HO134.000.9450-600
STDS-2-1223.00SDS+12"0.51 1/2"RB-24HO149.001.1350-500
STDS-2-1831.00SDS+18"0.91 5/8"RB-26HO186.001.2350-500
STDS-2-2441.00SDS+24"1.21 3/4"RB-28HO193.001.3350-500
TDS-3-924.001/2"9"0.4bracket1/2-13
MALE
2"RB-32HO214.001.8350-500
bracket
1/2-13
FEMALE
TDS-3-1226.001/2"12"0.5
TDS-3-1836.001/2"18"0.9
TDS-3-2450.001/2"24"1.2
STDS-3-927.00SDS+9"0.42 1/2"RB-40HO234.002.4350-500
STDS-3-1230.00SDS+12"0.5
STDS-3-1840.00SDS+18"0.9
STDS-3-2455.00SDS+24"1.2
Follow power tool manufacturersʼ recommendations for bit capacity.
SAFETY NOTE: The operator of this tool assumes sole responsibility for any adverse structural effects of cutting rebar. 
Consult structural engineers if you have any concerns

1.

When rebar is encountered while drilling with a rotary hammer and a carbide hammer bit, immediately stop the hammer and remove the bit from the hole (failure to stop could severely damage a carbide hammer bit - regardless of manufacturerʼs claim).

2.

Mount a rotary rebar cutter in a standard 1/2" chuck/drill motor or SDS+ rotary hammer-motor (with the selector in the rotary-only position); insert the rotary rebar cutter into the hole and drill through the embedded rebar.

3.

Remove the rotary rebar cutter after the rebar has been drilled completely through and finish drilling the hole with the rotary hammer and hammer bit.

Rebar1

Rebar2

Rebar3

NOTICE:

The Relton carbide-tipped rotary rebar cutter is designed for use in a standard 1/2" chuck/drill motor or SDS+ hammer motor provided the selector mechanism is kept in the rotary-only position. The Relton carbide-tipped rotary rebar cutter is intended for rotary drilling only; percussion (hammering action) will damage the tool.